FUTABA FDP02TJ010 Instruction Manual page 7

Ver.1.1
Environmental Safety Hazards and Notes
II.IV
Other Notice
II.V
If the FDP02TJ010 has been stor
specified o perating temperature range for th
function pro perly. Allow it to re turn to norm al tem peratures before
use. Refer t o A
PPENDIX
actual operating temperature range.
The FDP02TJ010 is a precision electr onic device with a rugged design
that is in tended for industrial applications. However, do n ot install it
where it will encoun ter excessive vibrations. In some cases, isolation
mounts m ay be used to isolate
vibration. Excessive vibration can perm anently dam age the m odem
and/or cause it to malfunction.
Do not ope rate th e FDP02TJ010 in environments where it will b
subjected to excessive moisture (such as rain or water spray), dust, oil,
or other foreign m atter (such as
permanently damage the m odem and/or cause it to m alfunction. If it
does become wet or contam inated, co rrect the situation, verify proper
operation and have any problem s correct ed before using it to control
other equipment. If necessary, the m odem can be m ounted inside a
protective o r waterproo f enclosure.
antenna m ust be m ounted externally or the effective operating range
will be severely limited.
The FDP02TJ010 is designed for indoor use. When using it outdoors,
the m odem should be m ounted in a waterproof enclosure and the
ambient temperature range should be check ed to insure that it is within
the m odem's specifications. Always use the m
specified environmental ranges.
Italicized gothic word used in th is m anual shows functional and
technical term especially important for the FDP02TJ010.
ed at a temperature beyond the
A – T
ECHNICAL
the m odem from the equipm ent's
metal partic les). Doin g so m ay
If the enclosure is m etallic, th e
7
e system , it m ay not
for t he
S
PECIFICATIONS
odem within its
e