Table of Contents
Advertisement
Trigger of the data transmission is time-out at headerless packet transmission mode 0
E: <CR/LF> is NOT added to received data:
<CR/LF> is ADDED to received data:
*At headerless packet mode, the value of C is always 1.
The total time until completion of the data transmission is calculated by below formula.
Bit length per byte
Line speed
of
the sender
A: Text data is transmitted at packet transmission mode:
Binary data is transmitted at packet transmission mode:
Trigger of the data transmission is delimiter at headerless packet transmission mode:
Trigger of the data transmission is time-out at headerless packet transmission mode: 0
B: Trigger of the data transmission is time-out at headerless packet transmission mode:
Others:
C: Data size of message is 0 to 26 bytes:
Data size of message is 27 to 52 bytes:
Data size of message is 53 to 78 bytes:
Data size of message is 79 to 104 bytes:
Data size of message is 105 to 103 bytes:
* At headerless packet mode, the value of C is always 1.
× 1000 × (size of message in bytes + A + 4) + B + 6.4 × C + 1.5
9
0
2
9
12
"Value of REG26" x 10
0
1 (*)
2
3
4
5
Ver.1.1
Expression 2
2
Advertisement
Table of Contents
