FUTABA FDP02TJ010 Instruction Manual page 48

Ver.1.1
POF (
Release low power stand-by mode
[Format]
POF
[Response]
P0: Norm al end
N0: Co mmand error
[Function]
- The operation mode is returned from "Low power stand-by mode" to "Normal operation mode" by this
command.
[Example of use]
>@POF<Cr><Lf>:
<P0<Cr>Lf>:
PON (
Set low power stand-by mode
[Format]
PON
[Response]
P0: Norm al end
N0: Co mmand error
[Function]
- The operation mode is set to "Low power stand-by mode..
[Example of use]
>@PON<Cr><Lf>:
<P0<Cr>Lf>:
)
Release low power stand-by mode.
Normal end.
N0 response is returned if this command is executed during normal
operation mode.
)
Set low power stand-by mode.
Normal end.
N0 response is returned if this command is executed during low power
stand-by mode.
36