Table of Contents
Advertisement
Ver.1.1
IDR (Show ID code)
[Format]
IDR
[Response]
xxxxH:
Current setting value
(It is the value of REG04 and REG05 right after turned ON the main power.)
[Function]
- This command shows the ID code.
[Example of use]
>@IDR<Cr><Lf>:
<0000H<Cr>Lf>:
IDW (Set ID code)
[Format]
IDW
Available setting value: "0000H" to "FFFFFH"
[Response]
P0: Norm
al end
N0: Co mmand error
[Function]
- This command can change ID code temporarily. For permanent change, REG04 and REG05 should be
changed.
[Example of use]
>@IDW1234H<Cr><Lf>:
<P0<Cr>Lf>:
This command shows the ID code.
This response indicates the current ID code is "0000H".
This command set ID code to 1234.
Normal end.
32
Advertisement
Table of Contents
