Table of Contents
Advertisement
Ver.1.1
REG25 (
)
Sleep time
This register can define the time duration of the sleep mode. Available setting value is 1 to 255. The unit
of this setting is defined by bit1 of REG24. (x 10ms or x 100ms). Initial setting is 4 (40ms or 400ms).
This time setting is available when the low power stand-by mode is set by PON command.
REG26 (time-out of headerless-packet data input)
This register is available when the transmission mode is headerless packet mode (setting value of REG03 is
"FFH") and the trigger of the data transmission is time-out (the bit 6 of the REG24 is set to "0"). The data
packet is transmitted if no data packet is coming during set time by the REG24 and the REG26.
If the bit 0 of the REG24 is set to "0", the unit of this time set is 1 ms. Similarly, if the bit 0 of the REG24
is set to "1", the unit of this time set is 10 ms. Available value of the setting is from 01H to FFH, 0 to 255.
However, minimum time duration is 3 ms even if the setting is below 3 ms.
The FDP02 returns N0 response if "00H" is set to the value.
24
[Default: 04H]
[Default: 01H]
Advertisement
Table of Contents
