Table of Contents
Advertisement
Ver.1.1
Notice
I
This device complies with pa rt 15 of the FCC rules. Operation is subject to the f ollowing
two conditions: (1) Th is device may not cause ha rmful interference, and (2) th is device must
accept any interference received, including interference that may cause undesired operation.
This equipm ent has be en tested and found to comply with the lim its for a Class A digital
device, pursuant to part 15 of the FCC Rul
es. These lim its are designed to provide
reasonable protection against harm ful interfer ence when the equipm ent is operated in
a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in acco rdance with the instru ction m anual, m ay cause
harmful interference to radio comm unications. Operation of this equip ment in a re sidential
area is like ly to caus e harmful interference in which case the user will b e required to correct
the interference at her/his own expense.
Any unauthorized changes or m odifications to this device not expressly approved by Futaba
Corporation could void the user 's author ity to opera te th e device and possibly result in
damage to the equipm ent and/or cause serious
or f atal injuries to th e operato r or nearb y
personnel.
This device is intend ed to be installed and used in accordance with the instructions contained
in this manual. Failure to com ply with the se instructions could void th e user's authority to
operate the device and possibly result in dam age to the equipm ent and/or cause serious or
fatal injuries to the operator or nearby personnel.
Important Safety Information
II
The list of dangers, warnings and cautions in th is section contain important information that
will help en sure safe op eration of the system . Please read carefully and understand all of
these items. All installers, operators and m aintenance personnel should read and understand
this information before installation, use, or maintenance of the FDP02TJ010.
The FDP02TJ010 system by itself is not inherently dangerous.
HOWEVER, WHEN THE
FDP02TJ010 IS CONNECTED TO OTHER EQUIPMENT FOR THE PURPOSE OF
CONTROL, SAFETY AND ALL POSSIBLE ASSOCIATED DANGERS MUST
ALWAYS BE GIVEN THE UTMOST CONSIDERATION DURING SYSTEM
INTEGRATION, DESIGN, INSTALLATION, AND USE.
The FDP02TJ010 m ay be used in virtually unlim
ited applications.
Many of these
associated s ystems can, by them selves, pose a mechanical, electrical or o ther hazard to
operators and other persons or equipm
ent.
To address all possible applications and
associated s afety hazard s in th is m anual would be im possible.
The warnings below and
throughout this m anual give information th at will allow safe installatio n and use the m odem
system applications.
If you have questions regarding the safety of your specific application,
please contact th e ap propriate people for help.
Your Futaba sales representative,
representatives of the equipm ent being controlled, and the t echnical support staff at local
branch of F utaba Corporation are among those who can provide assistan ce with your safety
concerns.
The following warnings are included in the lists that follow but warrant repetition here:
In installations where the FDP 02TJ010 is used to control moti on or operation of potentially
dangerous equipment, it is imperative for safety that all operat ors and installers be thoroughly
trained in the normal function of that equipment before attempting to control it remotely with
the FDP02TJ010.
2
Advertisement
Table of Contents
