FUTABA FDP02TJ010 Instruction Manual page 42

Ver.1.1
FNU (Show/set a frequency group)
[Format]
FNU (frequency-group)
Available "frequency-group": 1 to 3
[Response]
x: Currently set value
P0: Norm al end
N0: Co mmand error
[Function]
- This command shows or sets the frequency group.
- When this command is executed without setting value, current value is recalled.
- Available setting value "x" is 1 to 3. "1" indicates 1 channel mode (fixed frequency channel), "2" means
2 channel mode, and "3" represents 3 channel mode.
- Frequency group setting by this command is temporary. Thus, the setting is returned to that of REG06
after executing RST command or resetting FDP02. For permanent setting, the REG06 should be
changed.
"x" Description
(Setting
Value)
1 1 channel mode. Frequency channel that defined by REG07 is used.
2 2 channel mode. Frequency channels that defined by REG07 and REG08 are used.
3 3 channel mode. Frequency channels that defined by REG07, REG08 and REG09
are used.
[Examples of use]
>@FNU<Cr><Lf>: This command recalls the current set frequency group.
<3<Cr><Lf>:
>@FNU1<Cr><Lf>: This command sets the frequency group to the 1-band mode (1).
<P0<Cr><Lf>:
This response indicates the current set value is "3" (3-band mode).
This response indicates the normal end of command processing.
30