Edge Blending Function - Eiki EK-355UK Owner's Manual

Description on using Edge Blending function
Edge Blending
Edge Blending function could project bigger and brighter with high resolution pictures via multi
projector. The Edge Blending software could adjust the color and the effect of the overlay edge.
Equipment:
2 or more projector with same resolution, Video duplicator, RS232 series cable.
Connection:
(1) Setting the projectors with the same level from ground and the same projection
distance from screen.
(2)Project the image through the video duplicator to each projecotr.
(3)Connect the computer and projectors via RS232 cable.
Setting:
(1)Setting the projected image as the same dimension by each projector.
(2)Press Menu button on the remote controller or control panel to pop up the OSD.
(3)Press ▲▼ button to select "Display"
(4)Press ▲▼ button to select "Aspect"
(5) Press ▲▼ button to select "Advanced" and press OK to ready for Edge Blending
function.
Adjustment:
The color and effect of the overlay edge can be adjusted with the Edge Blending
software.
The Edge Blending Software and its manual can be downloaded from EIKI website.
URL: http://www.eiki.com
Note:
● Edge Blending function can only effected with the same resolution projectors.
● Edge Blending function can apply via HDMI, VGA and RGBHV as input source.
● Setting the same lavel and prosition with the same dimension image would make the better
effect after edge blending adjustment.
68
Projector#1 Projector#2
Video
cable
Video cable
Video duplicator
RS232
cable
RS232 cable
......
Projector#N
Video
cable
Video cable
RS232
cable
RS232 cable
Computer