Hazard Indicators; Workshop Procedures - Upright TM12 Service Manual

Hazard Indicators

1-1 H
AZARD
D A N G E R
!
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
W A R N I N G
!
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
C A U T I O N
!
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
C A U T I O N
Indicates a potentially hazardous situation which, if not avoided, may result in damage to the machine.
1-2 W
ORKSHOP
Detailed descriptions of standard workshop procedures, safety principles and service operations are not
included. Please note that this manual does contain warnings and cautions against some specific service
methods which could cause personal injury, or could damage a machine or make it unsafe. Please under-
stand that these warnings cannot cover all conceivable ways in which service, whether or not recom-
mended by UpRight, Inc., might be done, or of the possible hazardous consequences of each conceivable
way, nor could UpRight Inc. investigate all such ways. Anyone using service procedures or tools, whether
or not recommended by UpRight Inc., must satisfy themselves thoroughly that neither personal safety nor
machine safety will be jeopardized.
W A R N I N G
!
Be sure to read, understand and follow all safety rules, operating instructions, and the Scaffold
Industry Association's MANUAL OF RESPONSIBILITIES of ANSI A92.6-1999 before performing
maintenance on or operating any UpRight Aerial Work Platform.
W A R N I N G
!
Never perform service on the machine in the elevating assembly area while platform is elevated without
first blocking the elevating assembly.
DO NOT stand in elevating assembly area while deploying or storing brace.
Refer to the Operator Manual for elevating assembly blocking instructions.
Page 1-2
I
NDICATORS
P
ROCEDURES
!
!
!
!
!
Section 1 - General Information
Service Manual