Specifications - Upright TM12 Service Manual

Work platform. serial numbers 7352 - current
Hide thumbs Also See for TM12:
Table of Contents

Advertisement

Specifications

S
PECIFICATIONS
Specifications subject to change without notice. Refer to the Service Manual for service and repair infor-
mation. Refer to the Parts Manual for illustrated parts breakdown. Hot weather or heavy use may reduce
performance. Meets or exceeds all applicable national safety requirements
ITEM
Platform Size
Maximum Platform Capacity
Maximum Number of Occupants
Height
Working Height
Maximum Platform Height
Minimum Platform Height
Dimensions
Weight
Overall Width
Overall Height (Lowered)
Overall Length
Drive Speed
Platform Lowered
Platform Raised
Energy Source
System Voltage
Battery Charger
Battery Duty Cycle
Hydraulic Reservoir Capacity
Maximum Hydraulic System Pressure
Hydraulic Fluid
Normal above 0° C [32° F]
Low Temp. below 0° C [32° F]
below -17° C [0° F]
Lift System
Drive Control
Control System
Horizontal Drive
Tires
Parking Brakes
Turning Radius (Inside)
Maximum Gradeability
Wheel Base
Guardrails
Toeboard
*Specifications are subject to change without notice. Hot weather or heavy use may affect performance.
Refer to the Parts Manual and the Service Manual for complete parts and service information.
The TM12 meets or exceeds all applicable requirements of OSHA and ANSI A92.6-1999.
Page 16
TM12
73,7 cm x 1,04 m (29 in. x 41 in.)
776 kg (1710 lbs.)
3,65 km/h (2.27 mph)
0,87 km/h (0.54 mph)
Four 220 ampere hour, 6 Volt batteries, min. wt. 26,3 kg (58 lbs.) each
4 HP DC electric motor
20 AMP, 220 VAC 50Hz
165 bar (2400 psi)
One Single Stage Lift Cylinder
Proportional Control Handle with Interlock, Selector Switch,
Red Mushroom Emergency Stop Switches
30,5 cm (12 in.) diameter solid rubber, Non-marking
Dual, Spring Applied, Hydraulic Release
97,8 cm (38.5 in.)
227 kg (500 lbs.)
2 People
5,83 m (19 ft.)
3,66 m (12 ft.)
48,3 cm (19 in.)
76 cm (30 in.)
165 cm (65 in.)
1,36 m (53.5 in.)
24V battery pack
24 VDC
25% for 8 Hours
7,2 L (1.9 gal)
ISO #46
ISO #32
ISO #15
Proportional
Dual Front Wheel
37 cm (14.5 in.)
14º (25%)
1,10 m (43 in.)
152 mm (6 in.)
107098-002 TM12 - Operator Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents