Panel And Key Brilliance; Day/Night Mode (Dimmer Mode: Fe-800) - Furuno FE-800 Operator's Manual

Navigational echo sounder

Hide thumbs Also See for FE-800:

Table of Contents

1. OPERATION

1.3

Panel and Key Brilliance

Both panel and key brilliance can be adjusted from the main screen using the following procedure:

1. Press  or  on the BRILL pad to open the Brilliance pop-up window.

2. Press  or  to adjust panel brilliance.

3. Press  or  to adjust key brilliance.

4. Press the MENU/ESC key to close the pop-up window.

Brilliance settings for Day or Night mode are stored separately.

When changing modes, the last-used setting is restored.

Panel brilliance, Key brilliance and Colour scheme mode can be changed for the suitable location

in the [Day/(Dusk)*1/Night].

*1: Dusk setting is available when Dimmer Mode*2 is ECDIS.

*2: According to the Dimmer Mode setting, it is selectable that panel brilliance change from the

external equipment is available or not. Refer to the section 2.13.

1.3.1

The FE-800 has Day and Night display settings to allow better screen visibility. To switch between

modes, do the following:

1. Press the MENU/ESC key to open the Main menu.

2. Select [Day/Night], then press the ENT key.

3. Select [Day] or [Night] as appropriate, then press the ENT key.

4. Press the MENU/ESC key once to close the menu.

The default settings for Day and Night modes are shown in the table below.

Panel

Mode

Brilliance

Day

Night

Key

Brilliance

Table of Contents