Table of Contents
Advertisement
Super X11DPU-Z+ User's Manual
Motherboard Features
CPU
•
This motherboard supports dual 81xx/61xx/51xx/41xx/31xx Socket P) socket processors which offer Intel UltraPath
Interconnect (UPI) of up to 10.4 GT/s
Note: Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers. Refer
to the block diagram on page 18 to determine which slots or devices may be affected.
Memory
•
Integrated memory controller embedded in the processor supports up to 3 TB of 3DS LRDIMM/LRDIMM/3DS RDIMM/
RDIMM/NV-DIMM DDR4 ECC 2666/2400/2133 MHz in 24 DIMM slots.
DIMM Size
•
Up to 128 GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at
motherboard.
Chipset
•
Intel C621 PCH
Expansion Slots
•
PCI-Express 3.0 (x16+x16) slots supported by CPU2 for left riser card use (SXB1A/SXB1B//SXB1C)
•
PCI-Express 3.0 x8 (in x16) slot for center right riser card slot (SXB2)
•
PCI-Express 3.0 x16+x16+x8 slots far right ultra riser card (used for SAS3 AOM expansion and LAN options via NVMe
ultra riser card support) (SXB3A/SXB3B//SXB3C)
BaseBoard Management Controller (BMC)
•
ASpeed AST 2500 Baseboard Controller (BMC) supports IPMI 2.0
•
One (1) Dedicated IPMI LAN located on the rear IO back panel
Graphics
•
Graphics controller via AST 2500 BMC (BaseBoard Management Controller)
Network Connection
•
Intel C621 supports two Gigabit LAN (1 GbE) ports on the X11DPU-Z+
•
One IPMI-dedicated LAN supported by the AST2500 BMC
I/O Devices
•
Serial (COM) Port
•
SATA 3.0
•
RAID
•
NVMe
Motherboard Features
•
One (1) Fast UART 16550 port on the I/O back panel
•
Eight (8) SATA 3.0 ports supported by Intel PCH (I-SATA 0-3, I-SATA 4-7)
•
Two (2) SATA 3.0 ports with power-pins built-in, w/support of Supermicro
SuperDOM (S-SATA4/S-SATA5)
•
RAID 0, 1, 5, and 10
•
Four (4) NVMe (x4) PCI-E 3.0 slots
14
http://www.supermicro.com/products/
Advertisement
Table of Contents
