Table of Contents
Advertisement
Supe X11DPU-Z+ User's Manual
DIMM Installation
1. Insert DIMM modules in the following
order: P1-DIMMA1, P1-DIMMD1, P1-
DIMMB1, P1-DIMME1, and P1-DIMMC1,
P1-DIMMF1. For the system to work
properly, please use memory modules
of the same type and speed on the
motherboard.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Reverse the steps above to remove the DIMM
modules from the motherboard.
Release Tabs
Press both notches
straight down into
the memory slot.
38
BIOS
LICENSE
IPMI CODE
BAR CODE
X11DPU-Z+
REV:1.01
Notches
Advertisement
Table of Contents
