Table of Contents
Advertisement
Chapter 2 Introducing the Web Configurator
A login screen displays. Enter the default Username (admin) and Password
4
(1234), then click Login.
Figure 5 Login screen
Note: For security reasons, the MAX208M2W Series automatically logs you out if you
do not use the Web Configurator for five minutes. If this happens, log in again.
2.1.2 The Reset Button
If you forget your password or cannot access the Web Configurator, you will need
to use the Reset button to reload the factory-default configuration file. This
means that you will lose all configurations that you had previously and the
password will be reset to "1234".
2.1.2.1 Using The Reset Button
Make sure the Power light is on (not blinking).
1
To set the device back to the factory default settings, press the Reset button for
2
five seconds or until all LED lights blink one time, then release it. The device
restarts when the defaults have been restored.
Reconfigure the MAX208M2W Series following the steps in your Quick Start Guide.
3
26
MAX208M2W Series User's Guide
Advertisement
Table of Contents
