Chapter 10 The VoIP Account Screens
10.3 Server
Click VoIP > Account 1 (or Account 2) > Server to configure the register
server, proxy server, outbound proxy server and NAT settings for this SIP account.
Figure 68 VoIP > Account 1 (or Account 2) > Server
The following table describes the labels in this screen.
Table 51 VoIP > Account 1 (or Account 2) > Server
LABEL
Registrar Server
Registrar
Server
Port Number
SIP Service
Domain
Registrar
Period Time
Proxy Server
Proxy Server Enter the IP address or domain name of the SIP proxy server provided
Port Number
Outbound Server
146
DESCRIPTION
Enter the IP address or domain name of a SIP server. You can use up to
127 printable ASCII characters.
Enter the SIP server's listening port number. Keep the default value, if
you are not sure of this value.
Enter the IP address or domain name of another SIP server, if your VoIP
service provider gave you one. Otherwise, enter the same address that
you have entered in the Registrar Server field. You can use up to 64
printable ASCII characters.
Enter the session expiry time in seconds for the phone connections
using this account. The allowable range is 60~65535 seconds.
This allows the MAX208M2W Series to automatically disconnect any
phone calls using this account after a certain period of inactivity.
by your VoIP service provider. You can use up to 64 printable ASCII
characters.
Enter the SIP proxy server's listening port number, if your VoIP service
provider gave you one. Otherwise, keep the default value.
MAX208M2W Series User's Guide