Chapter 7 Network Setting
7.7 DHCP
Use these settings to configure whether the WiMAX Device functions as a DHCP
server for your local network, or a DHCP relay between the local network and the
service provider. You can also disable the DHCP functions.
Click Network Setting > LAN > DHCP to open this screen as shown next.
Figure 40 DHCP Screen
This screen contains the following fields:
Table 28 DHCP
LABEL
DHCP Server
DHCP Mode
100
DESCRIPTION
Select this if you want the MAX208M2W Series to be the DHCP server
on the LAN. As a DHCP server, the MAX208M2W Series assigns IP
addresses to DHCP clients on the LAN and provides the subnet mask
and DNS server information.
•
None - This disables DHCP mode for the MAX208M2W Series.
•
Server - This sets the MAX208M2W Series as a DHCP server for the
LAN.
•
Relay - This sets the MAX208M2W Series as a DHCP relay for the
LAN, allowing it to pass-through IP addresses assigned to LAN
devices from the ISP servers.
MAX208M2W Series User's Guide