Chapter 7 Network Setting
7.9 WPS
Use this screen to configure WiFi Protected Setup (WPS) on your MAX208M2W
Series.
WPS allows you to quickly set up a wireless network with strong security without
having to configure security settings manually. Set up each WPS connection
between two devices. Both devices have to support WPS.
Click Network Setting > WLAN > WPS to open this screen as shown next.
Figure 42 WPS Screen
This screen contains the following fields:
Table 30 WPS
LABEL
Enable WPS
Start WPS PBC
7.10 MAC Address Filter
Use these screens to configure a MAC (Media Access Control) address filter to
restrict access to the network.
104
DESCRIPTION
Select Enable and click Apply to activate WPS on the MAX208M2W
Series. Select Disable and click Apply to deactivate WPS.
This field is available after you select Enable in the Enable WPS field
and click Apply.
Click this to activate the Push Button Configuration. After clicking this
you will be able to use the WPS button at the back of the device to add
new wireless clients.
Note: You must press the WPS buttons within two minutes of each
other.
MAX208M2W Series User's Guide