Table of Contents
Advertisement
Chapter 7 Network Setting
Table 23 WAN (continued)
LABEL
Clone MAC
Address
First~Third
DNS Server
7.3 PPPoE
Use these settings to configure the PPPoE connection between the WiMAX Device
and the service provider.
Click Network Setting > WAN > PPPoE.
Figure 36 PPPoE Screen
96
DESCRIPTION
Enter a MAC address here for registering bridged devices on the
network if their current MAC addresses are causing problems.
For example, this can happen when a desktop computer swaps
network interface cards; the original NIC may have used its MAC
address to register itself on the network and now the new NIC is
unrecognized. Using a MAC address that you know is valid, i.e. a
"clone", allows that device to stay registered.
Select how the MAX208M2W Series acquires its DNS server
address.
• From ISP - Select this to have the MAX208M2W Series
acquire its DNS server address from the ISP.
• User Define - Select this to manually enter the DNS server
used by the MAX208M2W Series.
MAX208M2W Series User's Guide
Advertisement
Table of Contents
