Table of Contents
Advertisement
12.10 Time Zone
Use this screen to set the time zone in which the WiMAX device is physically
located.
Click Maintenance > Date/Time > Time Zone to open this screen as shown
next.
Figure 89 Time Zone Screen
This screen contains the following fields:
Table 70 Time Zone
LABEL
Time Zone
Enable Daylight
Savings Time
Start Date
End Date
12.11 Upgrade File
Use this screen to browse to a firmware file on a local computer and upload it to
the WiMAX Device. Firmware files usually use the system model name with a
"*.bin" extension, such as "MAX208M2W Series.bin". The upload process uses
HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a
successful upload, the system restarts.
Contact your service provider for information on available firmware upgrades.
Note: Only use firmware for your MAX208M2W Series's specific model.
MAX208M2W Series User's Guide
DESCRIPTION
Select the time zone at your location.
Select this if your location uses daylight savings time. Daylight savings
is a period from late spring to early fall when many places set their
clocks ahead of normal local time by one hour to give more daytime
light in the evening.
Enter which hour on which day of which week of which month daylight-
savings time starts.
Enter which hour on the which day of which week of which month
daylight-savings time ends.
Chapter 12 Maintenance
175
Advertisement
Table of Contents
