Static Route; Static Route Add - ZyXEL Communications MAX218M2W User Manual

Chapter 7 Network Setting

7.11 Static Route

Use these settings to create fixed paths through the network.
Click Network Setting > Route > Static Route to open this screen as shown
next.
Figure 44 Static Route Screen
This screen contains the following fields:
Table 32 Static Route
LABEL
Destination
Subnet Mask
Next Hop
Metric
Add

7.12 Static Route Add

Use these settings to configure a static route.
Click Add in the Network Setting > Route > Static Route screen to open this
screen as shown next.
Figure 45 Static Route Screen
106
DESCRIPTION
This field displays the destination IP address of the static route.
This field displays the subnet mask of the static route.
This field displays next hop information of the static route.
This field displays the static route metric.
Click this to add a new static route to the list.
MAX208M2W Series User's Guide