Table of Contents
Advertisement
Manually change the IP address of your computer that your are using to
2
192.168.100.x (for example, 192.168.100.5) and keep the subnet set to
255.255.255.0.
Type http://192.168.100.1 in your browser after the MAX208M2W Series finishes
3
starting up completely.
Log into the Web Configurator and open the Networking Setting > LAN >
4
DHCP screen.
Select Server for the DHCP mode, then enter 192.168.100.10 and
5
192.168.100.30 as your DHCP starting and ending IP addresses.
Leave the other settings as their defaults and click Save.
6
Next, go to the Networking Setting > WAN screen and select NAT in the
7
Operation Mode field. Click Save.
MAX208M2W Series User's Guide
Chapter 4 Tutorials
43
Advertisement
Table of Contents
