Table of Contents
Advertisement
3.1.2 LAN Settings
The LAN Settings screen allows you to configure your local network options.
Figure 10 Setup Wizard > LAN Settings
The following table describes the labels in this screen.
Table 6 Setup Wizard > LAN Settings
LABEL
LAN TCP/IP
IP
Address
IP Subnet
Mask
DHCP Server
Enable
Start IP
End IP
MAX208M2W Series User's Guide
DESCRIPTION
Enter the IP address of the MAX208M2W Series on the LAN.
Note: This field is the IP address you use to access the MAX208M2W
Series on the LAN. If the web configurator is running on a
computer on the LAN, you lose access to it as soon as you
change this field. You can access the web configurator again by
typing the new IP address in the browser.
Enter the subnet mask of the LAN.
Select this if you want the MAX208M2W Series to be the DHCP server on
the LAN. As a DHCP server, the MAX208M2W Series assigns IP addresses
to DHCP clients on the LAN and provides the subnet mask and DNS server
information.
Enter the IP address from which the MAX208M2W Series begins allocating
IP addresses.
Enter the IP address at which the MAX208M2W Series stops allocating IP
addresses.
Chapter 3 Setup Wizard
31
Advertisement
Table of Contents
