Dmz - ZyXEL Communications MAX218M2W User Manual

Max208m2w series. wimax ieee 802.16 indoor wifi cpe
Hide thumbs Also See for MAX218M2W:
Table of Contents

Advertisement

Chapter 7 Network Setting
Only Jane can connect to the Real Audio server until the connection is closed or
5
times out. The MAX208M2W Series times out in three minutes with UDP (User
Datagram Protocol), or two hours with TCP/IP (Transfer Control Protocol/Internet
Protocol).
Two points to remember about trigger ports:
Trigger events only happen on data that is coming from inside the MAX208M2W
1
Series and going to the outside.
If an application needs a continuous data stream, that port (range) will be tied up
2
so that another computer on the LAN can't trigger it.

7.16 DMZ

Use this page to set the IP address of your network DMZ (if you have one) for the
WiMAX Device. All incoming packets received by this MAX208M2W Series's WAN
interface will be forwarded to the DMZ host you set.
Click Network Setting > NAT > DMZ to open this screen as shown next.
Note: The configuration you set in this screen takes priority than the Network Setting
> NAT > Port Forwarding screen.
Figure 52 DMZ Screen
This screen contains the following fields:
Table 39 DMZ
LABEL
DMZ Host
114
DESCRIPTION
Enter the IP address of your network DMZ host, if you have one.
0.0.0.0 means this feature is disabled.
MAX208M2W Series User's Guide

Advertisement

Table of Contents
loading

Table of Contents