Table of Contents
Advertisement
Table 17 Wide Scan (continued)
LABEL
Frequency
(KHz)
Bandwidth
(MHz)
Search
Clear
6.7 Link Status
This screen provides a general overview of the current WiMAX connection with the
service provider.
Click WiMAX > Link Status to open this screen as shown next.
Figure 29 Link Status Screen
This screen contains the following fields:
Table 18 Link Status
LABEL
Profile
BSID
RSSI
CINR R3
MAX208M2W Series User's Guide
DESCRIPTION
This field displays the frequency in kilohertz (KHz).
This field displays the bandwidth in megahertz (MHz).
Click this to initiate a wide scan.
Click this to clear the wide scan results.
DESCRIPTION
This field displays the profile name.
This field displays the MAC address of the base station to which the
MAX208M2W Series is currently connected.
This field displays the Received Signal Strength Indication (RSSI),
which is an overal measurement of radio signal strength. A higher RSSI
level indicates a stronger signal.
This field displays the average Carrier to Interference plus Noise Ratio
(R3) for the current connection. This value is an indication of overal
radio signal quality, where a higher value means a better quality signal.
Chapter 6 WiMAX
83
Advertisement
Table of Contents
