Creating Dynamic Ipv6 Or Static Ipv6 Wan Connection - D-Link User Manual

DSL-224 Wireless VDSL2 Router with ASDL2+ Support
User Manual

Creating Dynamic IPv6 or Static IPv6 WAN Connection

To create a connection of the Dynamic IPv6 or Static IPv6 type, click the Add button on the
Connections Setup / WAN page in the Connections List section. On the opened page, go to
the All Settings tab. Then select the relevant value from the Connection Type drop-down list
and specify the needed values.
Figure 52. The page for creating a new Static IPv6 connection. Selecting a connection type.
Parameter
Interface
Enable connection
Connection name
A physical interface to which the new connection will be assigned.
In order to create a VDSL WAN connection, select the PTM value.
In order to create an ADSL WAN connection, select the value
corresponding to the existing interface or the Add new ATM PVC
value for creating a new interface at the physical layer.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 66 of 168
Configuring via Web-based Interface
Description