Creating Dynamic Ipv4, Static Ipv4, Or Ipoa Wan Connection - D-Link User Manual

DSL-224 Wireless VDSL2 Router with ASDL2+ Support
User Manual

Creating Dynamic IPv4, Static IPv4, or IPoA WAN Connection

To create a connection of the Dynamic IPv4, Static IPv4 or IPoA type, click the Add button on the
Connections Setup / WAN page in the Connections List section. On the opened page, go to
the All Settings tab. Then select the relevant value from the Connection Type drop-down list
and specify the needed values.
Figure 46. The page for creating a new Static IPv4 connection. Selecting a connection type.
Parameter
Interface
Enable connection
Connection name
For the Dynamic IPv4 and Static IPv4 types only.
A physical interface to which the new connection will be assigned.
In order to create a VDSL WAN connection, select the PTM value.
In order to create an ADSL WAN connection, select the value
corresponding to the existing interface or the Add new ATM PVC
value for creating a new interface at the physical layer.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 59 of 168
Configuring via Web-based Interface
Description