D-Link User Manual page 26

DSL-224 Wireless VDSL2 Router with ASDL2+ Support
User Manual
6. In the opened window, in the list of available wireless networks, select the wireless network
DSL-224 and click the Connect button.
7. In the opened window, enter the network key (see WPS PIN on the barcode label on the
back panel of the device) in the Security key field and click the OK button.
8. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
If you perform initial configuration of the router via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the router you will need to
reconfigure the wireless connection using the newly specified settings.
Figure 15. The list of available networks.
Page 26 of 168
Installation and Connection