Creating Dynamic Ipv6 Or Static Ipv6 Wan Connection - D-Link DSL-2740U User Manual

DSL-2740U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual

Creating Dynamic IPv6 or Static IPv6 WAN Connection

On the connection creation page, go to the All Settings tab. Then select the relevant value from
the Connection Type drop-down list and specify the needed values.
Figure 53. The page for creating a new Static IPv6 connection. Selecting a connection type.
Parameter
Interface
Enable connection
Connection name
A physical interface to which the new connection will be assigned.
In order to create an Ethernet WAN connection, select the value
corresponding to the LAN port specified as the WAN port.
In order to create an ADSL WAN connection, select the value
corresponding to the existing interface or the Add new ATM PVC
value for creating a new interface at the physical layer.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Available for the advanced mode only.
A name for the connection for easier identification.
Page 68 of 174
Configuring via Web-based Interface
Description