Configuring Wireless Network - D-Link User Manual

DSL-224 Wireless VDSL2 Router with ASDL2+ Support
User Manual

Configuring Wireless Network

1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own
name for the wireless network or leave the value suggested by the router.
In the Password field, specify your own password for access to the wireless network or
2.
leave the value suggested by the router (WPS PIN of the device, see the barcode label).
3. You can restore the parameters of the wireless network specified before resetting to factory
defaults. To do this, click the RESTORE button.
4. If you want to create an additional wireless network isolated from your LAN, select the
Enable guest network checkbox.
5. In the Network name field, specify your own name for the guest wireless network or leave
the value suggested by the router.
6. If you want to create a password for access to the guest wireless network, deselect the Open
network checkbox and fill in the Password field.
7. If you want to limit the bandwidth of the guest wireless network, select the Enable
shaping checkbox and fill in the Shaping field.
Click the NEXT button
8.
Figure 30. The page for configuring the wireless network.
Figure 31. The page for configuring the wireless network.
or click the BACK button to specify other settings.
to continue
Page 41 of 168
Configuring via Web-based Interface