Traceroute - D-Link User Manual

DSL-224 Wireless VDSL2 Router with ASDL2+ Support
User Manual

Traceroute

On the System / Traceroute page, you can determine the route of data transfer to a host via the
traceroute utility.
To determine the route, specify the following parameters:
Parameter
Host
IPv6
Maximum TTL
Number of probes
Wait time
After specifying all needed parameters, click the START button to run the check. After a while, the
results will be displayed on the page.
To remove the check result from the page, click the CLEAR button.
Figure 119. The System / Traceroute page.
Enter the name or IP address of a host.
Move the switch to the right, if the route should be determined using
IPv6.
Specify the TTL (Time to live) parameter value. The default value is
30.
The number of attempts to hit an intermediate host.
A period of waiting for an intermediate host response.
Page 157 of 168
Configuring via Web-based Interface
Description