Pc With Wi-Fi Adapter - D-Link User Manual

DSL-224 Wireless VDSL2 Router with ASDL2+ Support
User Manual

PC with Wi-Fi Adapter

1. Connect a phone cable between the DSL port of the router and the MODEM port of the
splitter. Connect your phone to the PHONE port of the splitter. Then connect another phone
cable between a phone jack and the LINE port of the splitter.
2. Connect the power cord to the power connector port on the back panel of the router, then
plug the power adapter into an electrical outlet or power strip.
3. Turn on the router by pressing the ON/OFF button on its back panel.
4. Turn on your PC and wait until your operating system is completely loaded.
5. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in wireless NICs are
equipped with a button or switch that turns on/off the wireless adapter (refer to your PC
documents). If your PC is equipped with a pluggable wireless NIC, install the software
provided with your Wi-Fi adapter.
Page 23 of 168
Installation and Connection