Wps - D-Link User Manual

DSL-224 Wireless VDSL2 Router with ASDL2+ Support
User Manual

WPS

On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a
method for connection to the WLAN.
The WPS function helps to configure the protected wireless network automatically. Devices
connecting to the wireless network via the WPS function must support the WPS function.
!
The WPS function allows adding devices only to the basic wireless network of the router.
Before using the function you need to configure one of the following authentication types:
!
Open with no encryption, WPA2-PSK or WPA-PSK/WPA2-PSK mixed with the AES
encryption method. When other security settings are specified, controls of the WPS page
are not available.
To activate the WPS function, move the Enable WPS switch to the right.
Figure 87. The page for configuring the WPS function.
Page 109 of 168
Configuring via Web-based Interface