Mac Filter - D-Link User Manual

DSL-224 Wireless VDSL2 Router with ASDL2+ Support
User Manual

MAC Filter

On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be
allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to
access the WLAN.
Figure 91. The page for configuring the MAC filter for the wireless network.
By default, MAC filtering is disabled.
To open the basic or additional wireless network for the devices which MAC addresses are
specified on this page and to close the wireless network for all other devices, in the MAC Filter
section, left-click the line of the wireless network. In the opened window, move the Enable MAC
filter switch to the right. Upon that the MAC filter restrict mode drop-down list will be
displayed. Select the Allow value from the drop-down list and click the SAVE button.
To close the wireless network for the devices which MAC addresses are specified on this page,
select the Deny value from the MAC filter restrict mode drop-down list and click the SAVE
button.
Click the ADD button to add a rule for MAC filtering.
Page 118 of 168
Configuring via Web-based Interface