Table of Contents
Advertisement
Warning messages
The following warning messages will be additionally
provided when the board has been installed in the VTR.
They are indicated on the mode display when "T&S&M" has
been selected as the setup menu item No.006 (DISPLAY
SEL) setting.
Monitor screen
display
(counter display)
UNKNOWN
SIG
NO MATCH
SIG
NOT1t t 100M
SIG
INVALID VIDEO
SIG
INVALID AUDIO
SIG
INVALID TC SIG
This warning appears only when a recording operation is in progress.
21
When it appears, nothing will be recorded on the tape and only the
erasure operation will be performed.
This warning appears only when a recording operation is in progress.
22
When it appears, the audio signals will be muted and recorded.
This warning appears only when a full EE operation with the REC button
23
pressed is in progress.
Description
This message appears when the
SDTI input signals are not in the
DVCPRO or DV format.
This message appears when the
format of the SDTI input signals
does not match the SYS format.
This message appears when the
SDTI input signals are not x1 speed
transfer signals in the DVCPRO HD
(100 Mbps) format.
This message appears when the
compressed video signals in the
SDTI input signals are irregular
signals.
This message appears when the
audio signals in the SDTI input
signals are irregular signals.
This message appears when the
time code signal in the SDTI input
signals is an irregular signal.
18
Operation
Recording opera-
tions cannot be
performed.
Recording opera-
tions cannot be
performed.
Recording opera-
tions cannot be
performed.
Operation
continues.
(See 21)
Operation
continues.
(See 22)
Operation
continues.
(See 23)
Advertisement
Table of Contents
