Secure Networks Without A Mac Address Filter; Secure Networks With A Mac Address Filter; Autoconnection Configuration - ABB CDD Product Manual

S
ecure networks without a MAC address filter
A security key, or passkey, is required to access the a secure wireless network; enter the
passkey as follows:
• Press the UP or DOWN buttons to scroll the list of characters,
(0-9, A-F).
• Press ENTER to confirm each character selected, (press
ESC to cancel the last character input).
• Press ENTER again to accept the passkey.
• Once the security key is input, press ENTER twice to start the connection attempt.
If the key is correct, a completion message appears on the display. If the key
input is not correct, the display shows the message "wrong password"; verify
the key and repeat the procedure.
S
ecure networks with a MAC address filter
• If a MAC address filter is present on the router, first enter the passkey as described above
in Secure networks without a MAC address filter.
• Once the passkey is entered correctly, it will be necessary to configure the MAC address
filter with the same procedure set out on the previous page for Open networks with a
MAC address filter (Open).
A
utoconnection configuration
The CDD automatically memorizes the parameters of the last wireless connection made
(SSID and network key). The Autoconnect feature enables the CDD to automatically connect
to the last wireless network selected. To activate/deactivate the automatic connection function:
• Press any button from the GENERAL INFORMATION display (or press ESC if already in
a previous level of the BASIC menu).
• Scroll to WLess AutoConn in the BASIC menu.
• Press ENTER to select.
• Scroll to YES/NO to activate/deactivate the function.
• Press ENTER to confirm the selection and ESC to return to the menu.
If the last network that the CDD was configured for is not available, the CDD
will not connect to any network.
To configure the CDD for a new WLess network, disable the Autoconnection
feature and reboot the CDD. This will enable the CDD to search for available
wireless networks.
4 - Connect and configure the CDD
- 17 -
Insert Passkey
.........
WLess AutoConn.
YES >