Local Monitoring Using The Cdd Web Server; Home Page - ABB CDD Product Manual

L
ocal monitoring using the CDD web server
In order to access the CDD local web server, a PC or tablet must be connected to the same local network, i.e.
through the same Ethernet or Wireless router, or connected directly to the CDD using an Ethernet cable. Enter
the IP address (page 24) and wait until the Home page is displayed.
H
OME page
Click on the serial number
to open a pop-up window
with individual inverter
information
The following information is displayed in the pop-up window:
MAC RF: Radio frequency MAC address
TIME STAMP: Date and time of the display
Fw RF: Radio frequency firmware version
uP: inverter firmware version
IDs:
DSP: DSP firmware version
IDi:
PN: part number
MODEL DESC: inverter model
SIGNAL: strength of radio communication
signal between the CDD and inverter
BOOST STAT: allows 3 states, RUN (booster
operational), START UP (booster awakening)
and PROT (booster into protection)
ALARM STAT: number of alarms on
individual inverter
INV STAT: allows 3 states, RUN (booster
generating power), START UP (inverter
awakening) and PROT (inverter into
protection)
VOUT: Output voltage
IOUT: Output current
FREQ: Frequency
VIN: Input voltage
POUT: Output power
EN TOT: Total energy produced
TEMP DSP: Internal DSP temperature
TEMP MOSF: Mosfet temperature
- 36 -
6 - System monitoring