Table of Contents
Advertisement
A
vailable versions
The CDD described in this manual is available in a single version suitable for all countries of installation. It is
required that the CDD be installed with any MICRO inverter in compliance with UL1741, for the purpose of
indication and resetting of ground faults.
The device can be associated with the following MICRO inverter equipment from ABB:
0.25 kW models
0.3 kW models
P
roduct label
The sample product label is affixed to the inverter and provides the following information:
Radio frequency communication MAC address
When registering the CDD on the Easy View portal, the MAC RF (radio frequency)
address is used as the product identification code (see System monitoring, Part 6).
R
egulatory nameplate
The nameplate shown is affixed to the inverter and provides the following information:
Technical data reported in this manual does not replace the data on the labels affixed
to the equipment.
MICRO-0.25-I-OUTD-US-208/240
MICRO-0.3-I-OUTD-US-208/240
MICRO-0.3HV-I-OUTD-US-208/240
CDD Part Number
CDD Serial Number
WIFI communication MAC address
Ethernet MAC address
- 8 -
1- Introduction and safety
P/N: PPPPPPPPPPP
S/N: YYWWSSSSSS
MAC WIFI:
A1:B1:C1:D1:E1:F1
MAC RF:
A2:B2:C2:D2:E2:F2:G2:H2
MAC ETH:
A3:B3:C3:D3:E3:F3
www.abb.com/solar
CONCENTRATOR DATA DEVICE
INPUT DC
: 5V , 0.5 A
Contains FCC ID: X6W-EMBZ
Contains FCC ID: W70ZG2100-ZG2101
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (i.) this device may not cause harmful interference and
(ii.) this device must accept any interference received, including interference
that may cause undesired operation.
®
Made in Italy
CDD
MODEL:
Hide quick links:
Advertisement
Table of Contents
