Description Of The Display Menus - ABB CDD Product Manual

D
escription of the display menus
The CDD display consists of 2 lines with 16 characters per line. The operating status and statistical data of the
inverter can be viewed along with service messages for the operator, warning and alarm messages. Inverter
settings can also be modified using the display menus.
• The UP and DOWN buttons are used to move around inside a menu or to scroll through a list of settable
values.
• The ESC button returns the user to the previous submenu when navigating.
• The ENTER button is pressed to select a submenu or to confirm an entered value/parameter.
• The UP and DOWN buttons pushed together will open the main menus for statistics, data display and
default settings.
An outline of the menu structure is shown below. A detailed description of the menu items can be found in the
table on page 14.
The CDD cycles through the
GENERAL INFORMATION
display during normal operation
Tot output power
.... W
Total Energy
.... KWh
System quality
......
MICRO: X
EXTRA: Y
Alarm status
......
DD/MM/YY
HH/MM/SS
Network
......
Press any button on the CDD
Press and hold the UP/DOWN buttons on the CDD until
Set Password is displayed
Enter password 0010 to access three MAIN menus
Press any button during normal
operation for access to set up
and view the BASIC menu
options of the CDD
Web Server IP
..........
MAC Addr. WLess
................
Subnet Mask
...........
IP Gateway
..........
Primary DNS
..........
Secondary DNS
..........
WLess Enabled
WLess AutoConn.
Web Server
Reset Password?
WLess SSID:
- 22 -
4 - CDD display operations
Yes >
Yes >
......
The thr
- Disp
- View
CDD
- Modi