Table of Contents
Advertisement
The registration process is completed in three steps:
Step 1.
•
Enter personal contact information.
•
Enter an email account.
•
An email with a validation will be sent to
the registered account.
•
Open the e-mail and click on the link to
continue the registration.
Account validation must occur within
3 days of receipt of the email; if not the
process will have to be re-started.
Step 2
•
Enter details about the solar power site/
home.
•
Provide the installer's name and contact
information to help direct current and
future homeowners to the installer for any
future project and service needs.
•
Site information defaults to the homeowner
address but can updated to a different
address for alternate locations such as a
second home.
Step 3
•
Link and validate the CDD to the solar
power site.
•
Make sure the CDD is connected to the
internet.
•
Enter the CDD's RF MAC address (MAC
RF) in the 8 display fields.
•
Click on the Validate button.
•
When validated, the logger and all
configured inverters will be displayed
•
Click I'm Done to complete the registration
process.
•
An e-mail will be sent confirming that
the registration has been successfully
completed.
- 34 -
Hide quick links:
Advertisement
Table of Contents
