Micromeritics AccuPyc 1330 Quick Reference Manual page 19

GENERAL DESCRIPTION
ZERO
CALffiRATE
MANUAL
SEfUP
TRANSMIT
ES CAPE
ANALYZE
REVIEW
PRINT
FILL
EXPAND
VENT
1-6
AccuPyc 1330
Tabte
1-2.
Key Combinations
)7:il
(when in
manual
mode)
I
;)'III\tl (when in
manual
mode)
lJ
:1
(when in
manual
mode)
Zero the pressure transducer.
Calibrate the pyenometer.
Manually contral the valves. After pressing the
Manual key, you may use the PUL, EXPAND,
and
VENT
eommands to open and elose
the
valves.
Display or edit analysis parameters, repon
. options, ealibration volumes, data transmission
parameters, unit types, and operating language.
Transmit analysis or ealibration data over the
serial line.
If
an automatie operation is in prog-
ress, transmit a partial repon.
Delete a1l data entered in the eurrent mode and
return to display mode.
If
an automatie opera-
tion is in progress, eancel the operation.
Perform an analysis.
Review or edit completed analysis or ealibration
data.
Print analysis or ealibration report If an auto-
matie operation is in progress, print a partial
report
Open and elose the fill valve. The indicator
above the FILL key is on when the valve is
open and off when the valve is elosed.
Open and elose the expansion valve. The indica-
tor above the EXPAND key is on when the
valve is open and off when the valve is elosed.
Open and elose the vent valve. The indicator
above the VENT key is on when the valve is
open and off when the valve is elosed.
15 Dec 89
•