Micromeritics AccuPyc 1330 Quick Reference Manual page 18

ACcuPyc 1330
GENERAL DESCRIPTION
Tables I-I and 1-2 describe how the keys are used to control and monitor the pycnometer.
lellöl~1
15 Dec 89
Table 1-1. Standard Keys
Enter the numbers 0 through 9.
Enter a decimal point or a dash for sampie ID.
Complete an entry or begin an action.
Display the next message when in display mode. Display the next
multiple choice item when in a command mode.
Clear a message when in display mode. Clear an entry when in a
command mode.
Save the information you entered and return to display mode.
Change the keypad mode. The keypad may be used in either pri-
mary function mode or alternate function mode.
When you press the white key to enter alternate function mode, a
plus sign (+) appears in the upper right corner of the displayand
the commands written above the keys become available.
To exit alternate function mode, press the white key again. The
plus sign
(+)
will be removed from the display.
1-5