Anti-Tamper And Anti-Pulling Switches; Description - Sagem Securite MorphoAccess J-Bio User Manual

M A ® J S – User Guide
ORPHO CCESS ERIES
7. Anti-tamper and anti-pulling
switches

Description

DOCUMENT SSE-0000077399-01 - V
S S D
AGEM ÉCURITÉ OCUMENT
®
The MorphoAccess J Series, like the MorphoAccess
detect two kinds of unsual events:
• the front glass is removed, by monitoring anti-tamper switches
• the terminal is removed from the wall, by monitoring the anti-pulling
switches
When one of those event is detected, the MorphoAccess
as required by the related configuration key (see section below):
• Ignore the event (default) : usefull during normal maintenance operations
• Send an alarm message to the Central Access Controller, through the usual
channel of the access control result messages (Wiegand, DataClock,
RS485, Ethernet or Wi-Fi
• Generate an audible alarm signal with the buzzer and a visual alarm signal
with the status LED.
Please refer to the MorphoAccess
information about the anti-tamper and the anti-pulling switches.
1.0 - M
ERSION AY
- R D
EPRODUCTION AND ISCLOSURE

Anti-tamper and anti-pulling switches

TM
.
®
J Series Installation Guide for more
2010
P
ROHIBITED
®
500 Series, is able to
®
J Series terminal acts
71