Multi-Factor Mode - Sagem Securite MorphoAccess J-Bio User Manual

M A ® J S – User Guide
ORPHO CCESS ERIES

Multi-factor mode

DOCUMENT SSE-0000077399-01 - V
S S D
AGEM ÉCURITÉ OCUMENT
This mode is the combination of identification mode and contactless
authentication modes.
This mode allows:
• running an identification if user places his finger on the sensor (operation
identical to identification mode)
• running an authentication if the user presents his contactless card
(operation identical to authentication with a contactless card with/without
database mode).
Figure 6 • 3: Multi-factor mode (identification and authentification)
If there is no database, the identification mode is out of service, but the
authentication mode is still available.
This mode is activated by enabling one of the authentication with contactless
card mode and identication mode.
Multi-factor mode
app/bio ctrl/identification
And
app/bio ctrl/authent PK contactless
app/bio ctrl/authent card mode
Required tag on card depends on the authentication mode.
1.0 - M
ERSION AY
- R D
EPRODUCTION AND ISCLOSURE
Access control by authentication
2010
P
ROHIBITED
1
0 or 1
0 or 1
53