Principle; Figure 3 • 1: Build A Setting File On A Usb Mass Storage Key; Figure 3 • 2: Apply Setting File To The Morphoaccess - Sagem Securite MorphoAccess J-Bio User Manual

M A ® J S – User Guide
ORPHO CCESS ERIES

Principle

DOCUMENT SSE-0000077399-01 - V
S S D
AGEM ÉCURITÉ OCUMENT
This feature is available to change network parameters (IP, address, mask and
gateway).
Store a file on a USB mass storage key
The administrator creates a configuration file on a PC using the USB Network
Configuration Tool. This configuration file contains new network
parameters. This file must be stored on a USB mass storage key.
Figure 3 • 1: Build a setting file on a USB mass storage key
Apply changes on a standalone terminal
The front window of the MorphoAccess
the USB Host Interface of the terminal. The terminal must be powered on.
When the USB mass storage key is inserted in the MorphoAccess
interface, the configuration file is read: network parameters are applied.
Figure 3 • 2: Apply setting file to the MorphoAccess
At the end of the process, two medium-pitched «beeps» indicates that the USB
mass storage key can be removed.
Please refer to USB Network Configuration Tool User guide for more
information about this procedure.
1.0 - M
ERSION AY
- R D
EPRODUCTION AND ISCLOSURE
Configuring a standalone MorphoAccess®
®
must be removed to give access to
2010
P
ROHIBITED
®
USB
®
17