Bypassing The Biometric Control In Authentication - Sagem Securite MorphoAccess J-Bio User Manual

M A ® J S – User Guide
ORPHO CCESS ERIES

Bypassing the biometric control in authentication

DOCUMENT SSE-0000077399-01 - V
S S D
AGEM ÉCURITÉ OCUMENT
To enable this mode set app/bio ctrl/authent card mode to 1.
To disable this mode set app/bio ctrl/authent card mode to 0.
Required tags on card
if CARD MODE tag value is ID_ONLY (fingerprint check disabled).
ID
Authen card
mode Yes
(ID_ONLY)
if CARD MODE tag value is PKS (fingerprint check required).
ID
Authen card
Yes
mode (PKS)
Card structure is described in MorphoAccess
When this option is activated, only the user ID is required on the user's card.
This option can be combined with any of the authentication modes. Activating
this option means that the fingerprint check is disabled.
The terminal controls that the user ID exists in the database
When combined with an authentication mode with templates in local database,
®
the MorphoAccess verifies that the User ID is present in the local database
before granting the access.
Authentication with User ID only on contactless card
Disabling biometric control, but User ID must be present in the
local database
app/bio ctrl/bypass authentication
app/bio ctrl/authent ID contactless
1.0 - M
ERSION AY
- R D
EPRODUCTION AND ISCLOSURE
Access control by authentication
Card
PK1 PK2
Mode
Yes No No
Card
PK1 PK2
Mode
Yes Yes Yes
®
Contactless Card Specification.
2010
P
ROHIBITED
PIN BIOPIN
No No
PIN BIOPIN
No No
1 (Enabled)
1 (Enabled)
51