Declaration Of Conformity - Ahlborn ALMEMO 2490-2 Operating Instructions Manual

14. Declaration of conformity

14. DECLARATION OF CONFORMITY
Ahlborn Mess- und Regelungstechnik GmbH declares herewith that measuring
instrument ALMEMO
requirements of EU directives relating to low voltage and to electromagnetic
compatibility (EMC) (89/336/EWG).
The following standards have been applied in evaluating the product.
Safety / security:
EMC:
If a product is modified in any manner not agreed with us
in advance, this declaration becomes void.
When using the sensor with an extension care must be taken to ensure that
wiring is not laid alongside or close to high-voltage power cables and that it is,
if necessary, properly shielded so as to prevent spurious interference being in-
duced in the system.
The following advisory notes must be observed when operating the device :
Using the device in strong electromagnetic fields may aggravate measuring er-
rors (<50 µV at 3 V/m and 1.5 meters thermocouple sensor). After expos-
ure to such irradiation ceases, the device will again operate within its
technical specifications..
32 ALMEMO
® 2490 carries the CE label and complies in full with the
EN 61010-1:2001
EN 61326: 2006
2490
®