Rcom Reptile MAX 60 User Manual page 4

1. Introduction
Electrical hazards
Do not use a damaged power Do not pull the cord when
cord or loose outlet. taking out the power cord, and
keep wet hands away from
▶ Risk of electric shock or fire.
connecting plug.
▶ Risk of electric shock or fire.
Setting Cautions
Do not install in dusty or dirty Do not install under the direct
environment. sunlight.
▶ Risk of damage or fire within ▶ Risk of fire or interference
the incubator. with the incubation process.
Do not cover the ventilating Install away from heat
opening. sources.
▶ Inner temperature can rise, ▶ Risk of damage to the
interrupting incubation. incubator case and
interference with the
incubation process.
Do not disassemble or modify Please ensure that no small
the incubator in any way. objects get into
the holes on the incubator.
▶ Risk if electric shock or fire.
▶ Risk of electric shock or fire.
Cleaning Cautions
Do not spray cleanser directly Clean the incubator by a soft
on the incubator surface. cloth with a neutral detergent.
4
(2) Safety Precautions
Be careful the details below when you use.
Never pull the plug out of the Do not twist or crush electric
outlet during the incubation cord.
period.
▶ Risk of electric shock or fire.
▶ Incubation will be interrupted.
Be careful the details below when you use.
Do not install in moist or Do not install in excessively
humid environment. cold or hot conditions,
cigarette smoke, etc.
▶ Risk of fire or electric shock.
▶ Risk of interference with
the incubation process.
Do not turn the incubator
Ensure that the incubator is
upside down.
installed on a stable surface
away from edges.
▶ Water will pour out of the
▶ Risk of damage to incubator incubator, and view window
and eggs and user from can be dropped or damaged.
accidental knocks or drops.
If the incubator sounds Clean the incubator thoroughly
strange or emits smoke before storing.
contact your service center.
▶ Risk of electric shock or fire.
Be sure to disconnect the electric cord from the outlet
before cleaning.
Brush away dust on the plug Do not use chemicals like wax,
with a dry cloth. benzene, alcohol, thinner,
aromatic, or lubricant, etc.
Do not insert multiple
connecting plugs in an outlet.
▶ Risk of fire or electrical
overload.
Do not use any other
non-standard parts except
those provided.
▶ Risk of damage or hatching
failure.
Children should be supervised
to ensure that they do not play
with the appliance.
If the incubator requires repair
disconnect from the power
supply and please contact to
your service center.
Wipe inside of incubator and
divider with antibacterial
cleanser to kill germ or bacteria
before use after long time
storage. Remove any foreign
substance on the fan and T/H
sensor with brush to guarantee
long time use. Make dry during
storage to prevent any
electrical problem.
▶ If you don't clean the inside of
incubator for a long time, dust
can cause some trouble or a fire.
DIGITAL INCUBATOR