Rcom Reptile MAX 60 User Manual page 14

4. Function Settings
Daily Temp. Range(D.T .G) setting method
▶ Daily temperature range (D.T.G)?
It is a function artificially making the highest time zone of
temperature by sun at the natural condition, and it is a
function that can raise the incubation success rate of
reptile by the optimal incubation environment by raising
temperature at the fixed time zone.
▶ In case of pressing
low humidity set method stage, "dtg" is displayed at the
temperature window and its set value flickers.
▶ When the alarm set value flickers, press
button each to change to "ON" ↔ "OFF" [Default setting : ON ]
▶ In case of pressing
(Centigrade /Fahrenheit)" is displayed as a next step at temperature window for 0.5 seconds and LED of "℃"
flickers.
▶ In case D.T.G was already set, for 3 hours of 24 hours, the inside temperature of incubator goes up 1.5℃ more
than set value, and "dtg" is displayed with temperature alternately at the temperature display window.
How to change Cels. & Fahr.
▶ Whenever pressing
"℃" ↔ "℉" alternately. [Default setting : ℃]
▶ After selecting wanted display, press
set. [Default setting : ℃]
℃ = 5/9 (℉ - 32)
14
(5) D.T.G setting method
(6) How to change Cels. & Fahr.
button one time at the abnormal
or
button after changing into wanted value, changed set value is saved and "C . F"
or button, LED flickers into
button to be
Step 11
Step 12
Step 13
Step 14
DIGITAL INCUBATOR