Rcom Reptile MAX 60 User Manual page 10

3. Incubation
Dew Condensation
▶ This is a naturally occurring phenomenon when there is a significant difference in temperature between inside
and outside of the incubator during incubation period.If this occurs, water may form in inside bottom of the
incubator(bottom part).
Do not place any goods near the incubator.
Water Makeup
▶ Refill water into each container tray once a month.
▶ Pour warm water of 300cc on the edge of each container
tray carefully in order for water not to be touched to egg
and sensor.
Candling
▶ Please candle with an egg candler once a week. Open the
cover of sight glass and container tray and flash a light
with a egg candler to candle egg. Remove infertile eggs
or incubation-stopped eggs.
Be careful for eggs not to be lifted and for shocks not
to be given.
Egg candler for exclusive use - See Rcom homepage.
Incubation Termination
▶ There is no specified ON or OFF button on the incubator. Just take off the power cord after hatching.
▶ It is not necessary to do Incubator Initialization with REPTILE MAX 60 incubator after hatching. Just connect
power again when you want to start incubation again.
10
(2) Dew Condensation / Water Makerup / Candling
(5) Incubation Termination
DIGITAL INCUBATOR