Ap Array; Ap Array Scan - D-Link DAP-2660 User Manual

D-Link DAP-2660 User Manual
The AP Array window allows users to create a set of devices on a network that are organized into a single group in order to increase ease of
management. Once a user has made the desired settings, click the Save button to let the changes take effect.
Enable AP Array:
This check box allows the user to enable the AP
array function. The three modes that are available
are Master, Backup Master, and Slave. APs in the
same array will use the same configuration. The
configuration will sync the Master AP to the Slave
AP and the Backup Master AP when a Slave AP and
a Backup Master AP join the AP array.
AP Array Name:
Enter an AP array name for the group here.
AP Array Password:
Enter an AP array password for the group here.
This password must be the same on all the APs
in the group.
Scan AP Array List:
Click this button to initiate a scan of all the
available APs currently on the network.
AP Array List: This table displays the current AP array status for
the following parameters: Array Name, Master
IP, MAC, Master, Backup Master, Slave, and Total.
Current Array This table displays all the current array members.
Members:
The DAP-2660 AP array feature supports up to
eight AP array members.

AP Array

AP Array Scan

59